BMW Efficient Dynamics Concept

BMW EfficientDynamics Concept

The BMW Vision concept car clearly demonstrates that the EfficientDynamics objectives are fully compatible when applied to a sports car. Conceived as a 2+2-seater with plug-in full-hybrid technology, the unique car combines the performance of a BMW M vehicle with a standard of fuel efficiency and emission management that exceeds even the current levels achieved by the latest small cars. The outstanding result is made possible by the combination of BMW ActiveHybrid components with an extremely economical combustion engine, and outstanding aerodynamic qualities.

The BMW EfficientDynamics Concept is the result of a "clean-sheet" development process to ensure that the correct achievements were made in the areas of efficiency, driving pleasure, technology, and emotional design. BMW EfficientDynamics Concept is the most comprehensive implementation of the EfficientDynamics philosophy seen so far. The powertrain provides a top speed limited electronically to 155 mph, with acceleration to 100 km/h in 4.8 seconds. Average fuel consumption in the EU test cycle is 3.76 liters/100 kilometers, equal to 62.6 mpg, and the CO2 emission rating is 99 grams per kilometer. CO2 emission management is even more outstanding when driving in the all-electric mode after charging the battery from a plug-in source: Taking all emissions in the generation of electricity into account, as prescribed by the EU formula, the car's emission rating is just 50 grams per kilometer.

The power and performance are made possible by combining a fuel-efficient 3-cylinder turbodiesel with one electric motor on each axle. The intelligent combination of these units, together with precisely controlled energy management, simultaneously enhances the dynamic performance and the efficiency of the car. Overall system output is 356 horsepower, and peak torque is 590 lb-ft. The special arrangement of the two motors and diesel engine allows all-wheel drive when driving in all-electric mode. The result is minimum power loss and a harmonious transmission of the power available under all conditions.

BMW EfficientDynamics Concept for the first time conveys the dynamic look of a BMW sports car to a hybrid vehicle. Developed with decades of experience in Motorsport, the body of this unique sports car is a result of intelligent lightweight technology and aerodynamic efficiency. In the design of the interior, the focus was likewise on both the fascinating driving experience and, in particular, on transparent, hands-on technology and maximum reduction of weight.

Turbodiesel engine with unprecedented specific output.

The combustion engine is a cutting-edge turbodiesel featured for the first time in the BMW EfficientDynamics Concept car. Displacing 1.5 liters on three cylinders, the engine consistently follows the downsizing principle of using a relatively small engine combined with a turbocharger to reduce fuel consumption.

Through its compact dimensions, the 3-cylinder fits conveniently in front of the rear axle like in an agile mid-engine sports car, despite the two seats at the rear. Fuel is injected by the latest generation of High Precision Direct Injection, and the turbocharger features variable intake geometry for maximum efficiency. Engine output is 163 hp with peak torque of 214 lb-ft.

The specific output of 109 hp per liter sets a new benchmark in diesel technology. The power delivered by the turbodiesel is conveyed to the rear axle by means of a double-clutch transmission (DCT). This advanced transmission technology, which already offers a particularly dynamic driving experience in BMW's M3 and Z4 Roadster, allows the driver to shift gears without the slightest interruption of power. BMW EfficientDynamics Concept features a newly-developed version of BMW's DCT with six speeds for maximum efficiency and flexibility.

Two electric motors for full-hybrid drive.

The combustion engine is supplemented by two electric motors. Consistently applying the BMW ActiveHybrid philosophy, development engineers followed the principle of "Best of Hybrid," choosing the optimum combination of a hybrid synchronous motor on the front axle and a full-hybrid system at the rear.

The driver benefits from the efficiency of the electric motors over a far wider speed range than with a conventional hybrid car. The rear axle comes with a second-generation full-hybrid system corresponding to the technology in the BMW ActiveHybrid 7 production model. The compact electric motor positioned between the diesel engine and the DCT outputs a consistent 33 horsepower and is able to reach a peak of up to 51 hp. Maximum torque for the rear electric motor is 214 lb-ft, the power, either supporting the diesel engine or in all-electric motoring.

The engine, a hybrid synchronous motor, offers continuous output of 80 horsepower and peak torque of 162 lb-ft. Extra power of 112 horsepower is available for a period of up to 30 seconds, and, for a 10-second "burst," the electric motor is able to develop 139 horsepower. The power is transmitted through a 2-stage, single-speed reduction gearbox.

BMW EfficientDynamics Concept is able to run completely under electric power, with the power of the turbodiesel engine alone, or through an infinite combination of the three power sources. Depending on driving conditions, the two electric motors may be used both for accelerating and for regenerating energy when applying the brakes and while coasting. This principle ensures efficient energy management, with the charge status of the lithium-polymer battery constantly remaining within the optimum range. When accelerating, the electric motors help to boost the car for even greater performance, ensuring immediate response and a significant reduction in fuel consumption. For a short time, such as in passing maneuvers, the cumulative maximum output of all three engines increases to 356 hp, with maximum torque generated by the three engines reaching 590 lb-ft.

The lithium-polymer battery for electrical energy.

The energy cells featured in BMW EfficientDynamics Concept are housed in a chassis element running from front to rear through the middle of the car. The front unit is the lithium-polymer complex, an ongoing development of the lithium-ion battery. Overall, BMW EfficientDynamics Concept comes with a total of 98 lithium-polymer cells, each offering a capacity of 30 amp/hours and developing continuous output of 600 Amps at a voltage of 3.7 V. For a period of 30 seconds, each cell is even able to develop maximum output of 1,200 Amps.

The serial arrangement of the lithium-polymer cells serves to generate nominal voltage of 364 volts, the gross storage capacity of the battery is 10.8 kW/h. With an unusually high discharge capacity of 80 percent, the battery delivers 8.6 kW/h for driving the car. This superior performance comes on overall weight of the entire energy storage system of just 187 lb. A further advantage is that through their optimum dimensions tailored to the specific qualities and features of the car, the lithium-polymer cells, together with the operating strategy chosen with a concept of "forward looking" energy management, reduces the thermal load acting on the battery to such an extent that there is no need for active cooling.

The Plug-in solution: convenient charging of the electric power system from a conventional power socket.

Brake Energy Regeneration captures electric power generated while driving without additional fuel consumption, which is subsequently used to supply power to the electric motors and on-board network. A further option is to connect the lithium-polymer cells to a conventional power socket for a simple and efficient charge process, using a plug-in connector in the front-right wing of the car. Connected to a standard EU power outlet (220 V, 16 Amps), the system requires a maximum of 2 ½ hours to fully charge the lithium-polymer cells. And wherever a power source with higher voltage and amperage (380 V, 32 Amps) is available, the charge time is an even shorter 44 minutes.

The Fuel efficiency and emission management opening new dimensions in hybrid technology.

The power delivered by the two electric motors and single diesel 3-cylinder engine gives the BMW EfficientDynamics Concept a level of performance superior to anything provided so far by a hybrid vehicle. Acceleration from a standstill to 100 km/h, for example, comes in just 4.8 seconds and the car could exceed its electronically-limited 155 mph top speed.

The fuel efficiency and emission management now reach a standard only achieved, if at all, by far less powerful small cars conceived for city traffic and short distances. Applying the criteria of the EU test cycle, BMW EfficientDynamics Concept offers average fuel consumption equal to 62.6 mpg. CO2 emissions, in turn, are 99 grams per kilometer. These consumption and emission figures are measured on a consistent internal power balance, meaning that the batteries and storage media for electrical energy maintain the same charge level throughout the entire test cycle (with the same level at the beginning and end) and are charged while driving only by the car's on-board systems.

As a plug-in hybrid, BMW EfficientDynamics Concept is able to cover the entire drive cycle for measuring fuel consumption also with its combustion engine completely switched off. Then, to subsequently charge the lithium-polymer cells to the same status as when setting off, all the driver has to do is connect the car to an external power grid. To determine the consumption of electric power, the only requirement is to compare the charge level of the battery before and after the test cycle. Applying this measurement process, the BMW EfficientDynamics Concept car consumes 17.5 kW/h per 100 kilometers, equal to a CO2 emission rating of just 50 grams per kilometer in the EU test cycle.

To determine the total volume of CO2 emissions when driving in the all-electric mode, new legal standards for measuring the level of fuel consumption are currently being prepared for hybrid and electric cars with a plug-in power supply. Applying this calculation method, the CO2 emission ratings generated by BMW EfficientDynamics Concept are reduced further to just one-third of the original figure of 99 grams per kilometer. Clearly, this significant reduction of emissions opens up a new dimension in BMW's EfficientDynamics development strategy in this unique concept car.

Aerodynamic qualities reflecting BMW's Motorsport experience.

BMW EfficientDynamics Concept also takes a new approach in its design and streamlining, the body and the interior clearly expressing the unique combination of supreme efficiency and the sporting performance of the brand. Following BMW's design language, this concept car visualizes both highly efficient aerodynamics and intelligent lightweight construction.

BMW EfficientDynamics Concept differs from the usual low-emission car concepts. The principle of "form follows function" is not just for the overall look of the car, but embraces each and every detail. Measuring 48.8" in height and boasting a sweeping, arch-like roofline, BMW EfficientDynamics Concept offers the slender silhouette of a classic Gran Turismo. With the combustion engine fitted in front of the rear axle, the designers have succeeded in giving the car a very low front end, with the flow of air being further smoothened by active louvers in front of the radiator, which close completely when the need for cooling air is low. This efficient function follows in the footsteps of the active air flap control already used as a feature of BMW EfficientDynamics in some of BMW's current production models. As a further highlight, BMW EfficientDynamics Concept guides air smoothly and exactly as required into the car through an active air intake at the front.

Numerous details in the design of the body are based on the know-how BMW has gained in Motorsport, a number of body elements serving as air deflectors and guide vanes. Designed as ducts, for example, the A-pillars serve to channel the flow of air in the same way as the rear lights with their wing profile. The floor of the car is fully covered from front to rear and from one side to the other, thus maintaining a smooth surface to avoid any air swirl liable to increase fuel consumption. Slender openings around the front air dam guide the air flowing specifically into two closed ducts leading inside the front air dam to the wheel arches where the air comes out again through a very slim aperture at high speed, flowing just next to the outer wheel flanks. This air jet rests on the front wheels like a curtain and is therefore referred to most appropriately as the "air curtain." It provides a highly stabilizing effect.

Overall vehicle concept for a drag coefficient of just 0.22.

To further optimize the aerodynamic qualities of the entire vehicle and keep rolling resistance to a minimum, BMW EfficientDynamics Concept comes with tires and wheels of quite unusual size on a sports car. The tires measure 195/55, while large 21-inch wheels provide a contact surface on the road otherwise offered only by a much wider tire. In combination with the sophisticated axle geometry, this ensures agile driving behavior.

The extra-large wheel covers extending over part of the tire flanks add to the unique, very different look of BMW EfficientDynamics Concept from the side. The blade profile integrated in the wheels serves furthermore to reduce the negative effect of the turning wheels on the overall aerodynamics of the car. In all, these features optimizing the aerodynamic qualities of the car give the BMW EfficientDynamics Concept car a very low drag factor (CX) of just 0.22.

Technological look as a strong impression of intelligent lightweight construction.

The design of BMW EfficientDynamics Concept stands out clearly as a strong spearhead in technology. Many components of the vehicle are presented in full view expressing the "transparent" character of the car as a powerful visual feature of lightweight technology. The chassis and suspension of BMW EfficientDynamics Concept are made completely of aluminum; the roof and the outer skin on the doors are made almost completely of a special polycarbonate glass automatically darkening as a function of the light shining on the car.

Measuring 181.1" in length, 74.8" in width and 48.8" in height, this unique concept car offers ample space for up to four passengers and their luggage. Thanks to the consistent lightweight construction strategy applied on the car, curb weight is 3,076 lb, with the center of gravity remaining very low. In its power-to-weight ratio, the BMW EfficientDynamics Concept car is far superior to all other hybrid cars, achieving the same standard as extremely dynamic sports cars with a conventional combustion engine.

Carrying a maximum payload of 981 lb, this unique 2+2-seater is fully suited for everyday traffic. Luggage capacity of 5.3 cu ft, in turn, allows the driver and passengers to conveniently take along two golf bags. And to meet additional loading requirements the backrests of the two rear seats may be tilted down individually to provide extra storage space.

The emotional design through sculptural shapes and layering technology.

Reflecting the innovative drive concept of this unique car, the design of BMW EfficientDynamics Concept likewise takes a new approach in combining functional progress with a most powerful emotional impact.

This has been achieved through the close cooperation of BMW's Design and Technical Development Divisions starting at an early point and continuing consistently throughout the entire development process. The result is a brand-new vehicle architecture with the drive components as well as the body and interior elements perfectly coordinated and matched to one another with maximum flexibility and individual style.

A fully integrated design philosophy also provided new options in using harmonized design principles connecting the exterior and the interior and providing an interacting effect between the two areas.

Sculptural design language giving BMW EfficientDynamics Concept a fully harmonized, complete look ensures the proportions typical of a BMW sports car. The front, side, rear and roof areas, for example, flow smoothly into one another. Dynamically contoured surfaces and shapes, in turn, create highly attractive light and shade effects accentuating the light and sporting character of the car in an emotional manner.

Layering technology developed by the BMW Group Design Division acts as the fundamental guideline in designing the exterior and interior. Applied for the first time in exterior design, this technology layers one surface on top of the other, creating very smooth seams and joints to reduce the number of components and, accordingly, the weight of the car. As a result, BMW EfficientDynamics Concept meets the most demanding aerodynamic requirements without using any additional body elements, simply through the structure of the surfaces optimized for a smooth flow of air.

Interior: innovative lightweight construction and unprecedented orientation to the driver.

Innovative layering technology provides an unprecedented symbiosis of function and stylish shapes intentionally reduced to a minimum, consistently implementing and visualizing the lightweight principle also inside the car.

Specific components such as the central air vent not only serving to enhance motoring comfort but also acting as part of the cockpit, perform several functions in one. This multi-functionality is then presented visibly within the car, the use of particularly sophisticated materials providing a highly attractive combination of innovation in technology and quality clear to the eye and the touch of the surface.

This interaction of lightweight construction and individual well-being also comes out clearly in the design of the controls and switches, with a leather band, for example, running round the aluminum gear selector lever on the center console. Materials combining lightweight technology and all the qualities required are also to be admired all round the cockpit of BMW EfficientDynamics Concept, giving the car an unusually generous feeling of space for a 2+2-seater. The body-contoured seats, for example, are made up of a kevlar shell, a backbone structure, and seat padding with personalized fillings. Clearly, this combination alone ensures comfort at a minimum weight. The driver's and front passenger's seats are connected firmly to the center console to form a joint interior "landscape", while the rear seats anchored on the floor would appear to be hovering in space. Natural materials and light colors on the seat upholstery and all interior linings underline the light, sophisticated and sustainability-oriented atmosphere within the passenger compartment.

The instrument panel is deliberately padded only where technical components have to be appropriately covered, thus making an important contribution to passenger safety in the event of a collision. The instrument cluster played a fundamental role right from the start in the design process, serving as the starting point for all surfaces within the interior and thus creating a particularly powerful rendition of that driver orientation typical of BMW.

The innovative light technology: providing clear signals to the outside and offering soothing ambient illumination inside in a unique symbiosis.

LED lights at both the front and rear end of BMW EfficientDynamics Concept provide an innovative combination of the symbols typical of the brand and clear design language oriented towards trendsetting technology. The distinctive look of the dual round headlights characteristic of a BMW is emphasized in particular by the use of LED technology. The rear lights are integrated also in their function into the design of the entire rear section, forming part of the rear air deflector and thus merging completely into the rear contour.

Extremely flat and compact, the rear lights are made up of innovative LED units forming a smooth and consistent red surface when not in use. Only when used do the respective light chambers take on the appropriate color such as yellow on the direction indicators. This innovative light technology also provides an intense symbiosis of the exterior and interior, again promoting and further refining the driving experience.

This is also why the ambient illumination of the interior comes with new features and qualities, the light sources within the passenger compartment being fed from the positioning lights at the side, the rear lights and the brake lights, thus changing the atmosphere created by the lights within the car as a function of driving conditions.

The optical impression conveyed by BMW EfficientDynamics Concept also results in other areas from the symbiosis of the exterior and interior, eliminating the conventional barriers between the two. The lines within the interior, for example, continue on to the innovative design of the engine compartment lid, while in its shape the third brake light positioned higher up on the car follows the structure of the glass roof and tapers to the outside where the roofline moves down gently to the rear.

Overhead doors for convenient access to all seats.

The doors on BMW EfficientDynamics Concept open up like bird's wings, turning on pivots in the front roof column at the level of the side direction indicators. Since the car has no B-pillars, the large door cutouts ensure convenient entry also to the rear seats. The pivots on the doors also provide the base for the exterior mirrors, thus forming an ideal combination of function and aesthetic design. The structure of the doors is also characterized by several layers of materials on top of one another and the optical and functional symbiosis of the interior and exterior this technology is able to offer. Made up of three layers, the overall structure comprises the outer glass surface, an interim load-bearing layer, and the interior cover with its particularly smooth shapes and fl owing forms clearly visible to the passengers, layering technology again, therefore, opening up new perspectives.

The large glass surfaces extending far down on the body also provide a strong optical impression of the low seating position close to the road. And at the same time a stable sidebar ensures the body stiffness and crash safety naturally required on every vehicle. Flowing to the inside at its central point, this safety element also serves as an armrest. This interplay of the three layers also helping to minimize the weight of the car continues on the trim bar running along the door and extending out of the armrest, finally flowing into the outer door opener on its path from inside to outside.

BMW X6 UK Version

BMW broke the four-wheel-drive mould in 1999 when it launched the X5 Sports Activity Vehicle. With a bias towards excellent on-road performance combined with a dynamic design and a premium interior, the BMW X5 was an instant success. And it's a winning formula that has, unlike most other models, led to increasing sales during its lifecycle with the biggest annual UK sales coming in its penultimate year. The timing of the BMW X5 was perfect and it reflected buyers' lifestyles and their desire for something unique in the marketplace.
The BMW X6 is a bespoke proposition, but one that competitors look set to copy…just like the BMW X5.

The concept of the new BMW X6 is best considered in relation to the link between the BMW 3 Series Saloon, Touring, Coupé and Convertible. People buy all four versions of the 3 Series depending on their circumstances and needs. The same will be the case for the BMW X6 compared to other BMW X models.

The BMW X6 UK Version

The BMW X6 is undeniably a niche car with BMW UK expecting to sell approximately 1,600 X6s in its first year - by comparison an average of 7,000 X5s are sold every year. Research has shown that three key buyer profiles exist:

A quartet of turbocharged engines

For the first time in BMW's history a model range has been launched solely powered by turbocharged engines. The BMW X6 xDrive35i is powered by the twin-turbocharged 2007 and 2008 International Engine of the Year winner that produces 306hp. This powerplant is capable of propelling the X6 xDrive35i from zero to 62mph in 6.7 seconds and on to a top speed of 149mph. The 2,979cc-engined X6 is still capable of achieving a combined 25.9mpg and a CO2 figure of 262g/km.

The BMW X6 xDrive30d and the BMW X6 xDrive35d also both have award-winning powerplants under their bonnets. The former, a single turbocharged unit produces 235hp from its 2,993cc block, while the latter ups the ante by offering 286hp from the same capacity engine but aided by twin-turbochargers.

The BMW X6 xDrive30d, which is likely to become the biggest selling X6 variant over time, reaches 62mph from zero in 8.0 seconds before going on to a top speed of 137mph. Emissions and economy figures are equally impressive, recording 217g/km and 34.4mpg respectively. The low CO2 output is enough for the car to qualify for a lower Vehicle Excise Duty band, compared to rival products, and continue to be an £8-a-day Congestion Charge vehicle in London should current proposals become statute.

The BMW X6 xDrive35d sprints from zero to 62mph in 6.9 seconds before going on to a top speed of 147mph. It too sits under the 225g/km higher Vehicle Excise Duty and Congestion Charge strata. The twin-turbocharged diesel records an emissions figure of 220g/km, while also being capable of 34.0mpg.

Completing the awesome foursome of powerplants is a new twin-turbocharged, high-precision direct injection, 4.4-litre V8 engine producing 408hp. This all-new engine, not seen in any other BMW product before, is the most powerful production non-M BMW V8 engine ever and makes the flagship X6 the most powerful production X product. It can reach 62mph from standstill in 5.4 seconds - quicker than a Porsche Boxster - before going on to an electronically-limited top speed of 155mph.

Brake Energy Regeneration is standard across the range and combines with active aerodynamics and low viscosity fluids in the steering and transmission systems. Third-generation common-rail technology diesel-engined cars and high-precision direct injection on the petrol models both serve to optimise the combustion process.

A new high in dynamic capability

The power of the BMW X6 is harnessed by an advanced chassis that incorporates Dynamic Performance Control for the first time on a BMW. Dynamic Performance Control offers drivers class-leading cornering ability courtesy of a complex multi-clutch differential that, effectively, helps drive the vehicle around a bend.

A conventional differential wastes power through wheelslip during cornering. A limited-slip differential locks out an unloaded wheel to transfer drive to the wheel with most grip - but the locked wheel can act as a drag on performance. However, Dynamic Performance Control improves on the traditional, performance oriented limited-slip differential. It allows an inside wheel to still deliver power and provide drive, while at the same time sending more drive to the outside wheel that has more grip. The result, combined with one of the most advanced stability control systems available, is a vehicle that out performs the current benchmark BMW X5 and some sports cars in terms of dynamic capability.

BMW 760Li

The new BMW 7-Series already sets the benchmark in luxury performance motoring - and now BMW is moving up the standard of maximum exclusivity and supremacy in this supreme class to an even higher level, following a completely new definition: The new BMW 760i and the new BMW 760Li are taking over the top position within BMW's model portfolio, representing the highest level of motoring refinement in their segment.
The heart and foundation of this exceptional new standard comes from the twelve-cylinder power unit featured in both top models in the BMW 7-Series. Developed as a completely new engine from the ground up, the V12 is a masterpiece of modern engine technology. Superior power of 400 kW/544 hp comes at an engine speed of 5,250 rpm, with maximum torque of 750 Newton-metres (553 lb-ft) from just 1,500 rpm.
Combined with the likewise brand-new eight-speed automatic transmission, this twelve-cylinder offers not only unparalleled motoring refinement, but also supreme driving dynamics through its ability to convert seemingly unlimited power reserves spontaneously and with precise control at all times into supreme driving dynamics.

The drivetrain with all its technical features is a masterpiece of supremacy in every respect. This applies both to the 6.0-litre all-aluminium power unit with TwinPower Turbo Technology, High Precision Injection with fuel injected directly into the combustion chambers, and to BMW's infinite double-VANOS camshaft adjustment as well as the eight-speed automatic transmission featured for the first time in a BMW.
Benefiting from all these technologies, the new BMW 760i and the BMW 760Li offer a new standard of motoring refinement, dynamic performance and all-round efficiency in a vehicle with this kind of power and output. Acceleration to 100 km/h comes in just 4.6) seconds, average fuel consumption in the EU test cycle is 12.9) litres/100 kilometres on the new BMW 760i.
In determining the cars' fuel consumption, BMW's engineers have already taken the stricter EU5 emission standard into account, meaning that with the cars' performance improving significantly fuel consumption is down by approximately 4.5 per cent versus the former model.

The new BMW 7-Series: the perfect saloon for supreme motoring refinement.
Boasting superior suspension technology, innovative driver assistance systems and luxurious comfort, as well as a combination of elegance and sporting performance borne out clearly by the car's design, the BMW 7-Series offers all the qualities required to enjoy a truly incomparable driving experience with a new twelve-cylinder power unit of a standard never seen before.

In addition to these outstanding technologies, the BMW 760Li features air suspension including self-levelling on the rear axle. And as an option both models are available with Integral Active Steering offering speed-related adjustment of the steering angle on the rear wheels. With this enhanced steering function both front and rear, particularly the cars' grand touring comfort on the rear seats reaches an even higher level, above all when changing lanes at high speeds.
The supreme grand touring comfort offered by the new top-of-the-range models in the BMW 7-Series is further underlined by comfort seats, BMW's navigation system Professional, automatic air conditioning with four-zone control, cruise control complete with an automatic brake function, Park Distance Control, and Automatic Soft Close on the doors all featured as standard.

The innovative driver assistance systems available as an option include Lane Change Warning, Lane Departure Warning, Active Cruise Control with Stop-&-Go function, BMW Night Vision with detection of individual persons, the BMW Head-Up Display, a back-up camera and the Side View system. And to supplement the bi-xenon headlights as a further option, BMW offers the High-Beam Assistant and Adaptive Headlights including Bending Lights, variable light distribution and adaptive headlight range control, setting new standards for safe driving at night.

The Design: discreet signals on the outside, stylish exclusivity inside.
The outstanding looks of the BMW 760i and BMW 760Li benefit from the harmonious combination of elegance, sportiness and natural presence so characteristic of the new BMW 7-Series in its design. Offering 14 centimetres or 5.5" longer wheelbase, the extended version allows particularly comfortable access to the rear seats. And thanks to the unique design of the roofline and C-pillar contours, the side view of the car, despite the extra headroom for the rear-seat passengers, maintains the same overall impression as on the "regular" saloon with its "normal" wheelbase. Both body versions, incidentally, come with the longest wheelbase in their respective segments.

Visual reference to the V12 power unit on the outside of the BMW 760i and the BMW 760Li is similarly stylish and discreet. The kidney grille for the radiator boasts an extra-wide chrome frame in slightly concave design as well as bars extending powerfully to the front. From the side, 19-inch light-alloy wheels available exclusively on these models as well as the V12 model designation on the chrome-plated gills with their integrated side direction indicators at the transition point between the front side panel and the driver's and, respectively, front passenger's door likewise serve to identify these very special models.
An additional chrome bar between the unique dual tailpipes on the exhaust system provides a special sign of distinction at the rear of both models. The exhaust tailpipes integrated in the rear air dam at the right and left, in turn, are made up of two adjacent, rectangular pipe units embellished with chrome trim and cut at a slight angle, flush to their surrounds.

Inside the BMW 760i and the BMW 760Li the luxurious ambience is supplemented by various design features tailored specifically to these two models and matched in perfect harmony, again expressing the exclusive character of the V12 models. Stainless-steel door entry trim with an illuminated V12 cover, the instrument panel finished in nappa leather and surrounded by elegant seams, the roof lining and sun visors in alcantara as well as top-quality wood trim in exclusive burr walnut with individual inlays help to give the BMW 760i and the BMW 760Li a further stylish sign of distinction versus the other models in the BMW 7-Series.

The new V12 power unit: perfection as the underlying principle, innovation as the driving power.
The twelve-cylinder power unit in a BMW 7-Series Luxury Performance Saloon guarantees a driving and travel experience quite unique in every respect. No other engine offers such an outstanding combination of power and refinement, no other power unit provides the same supreme standard of prestige.

Now these features come out even more clearly, with BMW's new V12 offering significantly more power and torque compared with their predecessors, optimising engine response and the ongoing surge of power, and further refining the engine's acoustics. The progress achieved in this way is clearly recognisable right from the start.
These features also stand out clearly from the BMW 750i which, with its modern V8 featuring TwinPower Turbo Technology and High Precision Injection, as such already offers the power and performance of a conventional twelve-cylinder.

Hence, the new V12 maintains the outstanding position of BMW's twelve-cylinder models also in the new generation of the BMW 7-Series, giving the driver of a BMW 760i and, respectively, a BMW 760Li all the assurance of absolute supremacy in the luxury class. Yet a further point is that the new engines combine the outstanding qualities of a V12 with up-to-date efficiency, offering a level of fuel economy and emission management even better than eight-cylinder models in the same segment as the BMW 7-Series.

The unique status of the twelve-cylinder as an incomparably powerful and, at the same time, refined power unit is based on a construction and design principle which offers perfect conditions for supreme power and performance achieved without the slightest effort. Benefiting from an angle of 60° between the two rows of cylinders, the V12, in its supreme elimination of vibrations, comes closer to the highest standard conceivable in physics than any other engine.
All components and design features on the all-aluminium engine block are built and constructed for supreme stiffness on minimum weight. Using a closed-deck structure combined with bolts holding the cylinder head down on the floor plate of the crankcase, the engine, to mention just one example, ensures maximum stability on the cylinder liners. Double bolts on the main bearings with an additional connection to the side panels through threaded support bushes and bolts reduce the influence of lateral forces from the crankdrive on the crankcase.

Further components of the engine block serving in typical BMW twelve-cylinder style to reduce vibrations to an absolute minimum are iron-coated aluminium pistons, forged connecting rods assembled through the cracking process, as well as the crankshaft also forged for absolute perfection. This also makes the sound of the engine when idling a very special experience where the driver first has to look at the rev counter to see whether the engine is running at all.

The new V12 power unit comes with 5,972 cc maintaining exactly the same cylinder volume as on the former engine. Displacing 497.7 cubic centimetres per cylinder, the engine therefore offers exactly the right size and dimensions acknowledged by engine specialists as absolutely ideal. Bore of 89 mm/3.50" and stroke of 80 mm/3.15" provides a ratio between these two parameters of 0.9, while the compression ratio is a remarkably high 10.0 : 1 quite unusual on a turbocharged power unit.

Introduction of TwinPower Turbo Technology on the twelve-cylinder.
BMW's new twelve-cylinder comes with a number of special technical features serving to capitalise on the potential it offers through its design principle and basic structure. In particular, this includes the first-ever use on a twelve-cylinder of TwinPower Turbo Technology and High Precision Injection with gasoline injected directly into the combustion chambers.
Featuring this combination of superior technologies already to be admired on BMW's six- and eight-cylinders, responding sensitively and directly even to small movements of the gas pedal, maintaining a consistent torque curve and offering a level of fuel economy and emission management quite unusual for an engine of this calibre, the new twelve-cylinder again stands out from the competition in every respect.
Thanks to the small cylinder angle of just 60°, the two exhaust gas turbochargers developed specifically for the new V12 fit in compact arrangement on the outside of the two rows of cylinders, each supplying six cylinders with compressed air.
The turbochargers stand out in particular through their unusually good compressor and turbine efficiency - and through their particular position they provide ideal conditions for keeping the pipes between the exhaust manifold and the turbochargers short and straight for ideal flow conditions. Central supply of turbocharger air into the air collector, in turn, helps to optimise both the engine's acoustics and charge cycle. The exhaust gas manifolds identical on each row of cylinders come in each case with two three-in-one connections geared to the engine's firing sequence. In combination with the catalytic converters optimised for minimum counter-pressure, this special configuration of the exhaust gas manifolds sets the foundation for outstanding spontaneity in following the gas pedal as well as supreme power and torque coming from the twelve-cylinder.

Peak torque now increased to 750 Newton-metres or 553 lb-ft comes at just 1,500 rpm and is maintained consistently all the way to 5,000 rpm. Compared with the former engine, this means an increase in torque by 25 per cent now developed at an engine speed approximately 2,300 rpm lower.
Engine power is also built up more quickly than on the previous engine, as is borne out by the much steeper power curve leading up to maximum output of 400 kW/544 hp at just 5,250 rpm.
Intelligent solution for even more power and supremacy.
The introduction of TwinPower Turbo Technology raises the twelve-cylinder to a level of output and torque a naturally-aspirated power unit would achieve only with much larger displacement. The increase in engine size and weight inevitable in such a case, together with negative effects on the centre of gravity, fuel consumption and the agility of the car, are all avoided most efficiently and intelligently through turbocharger technology.

To reduce counter-pressure the exhaust system comes on the underfloor with largely straight pipes and manifolds increased in size to the largest possible diameter. Exhaust flaps around the silencer masterminded by the electronic control unit as a function of engine maps provide exactly the right engine sound precisely geared to current driving conditions. When idling, therefore, the V12 remains absolutely silent, not emitting any noise at all. The same applies to cruising conditions, with only very discreet sound from the engine being emitted to the outside. So it is only at higher engine speeds that the driver receives appropriate acoustic feedback on the development of power, with the engine providing its muscular V12 sound when accelerating fast and under full power. Again, this special sound effect under such dynamic conditions authentically reflects both the capacity of the engine and the intensity of power coming from within the engine compartment, characterising the dynamic qualities of BMW's twelve-cylinder.

Optimised combustion and maximum efficiency ensured by High Precision Injection.
BMW High Precision Injection is a second-generation direct injection technology serving to optimise the combustion process and use the energy contained in the fuel with maximum efficiency. Piezo-injectors positioned in the middle of the cylinder head allow particularly precise dosage of the fuel injected into the combustion chambers.
In combination with TwinPower Turbo Technology, High Precision Injection is featured in all gasoline engines in the BMW 7-Series. And now, in the new V12 power unit, this technology ensures particularly efficient and clean combustion as the starting point for a level of fuel economy and emission management quite unparalleled in this class of performance.

The Opening up to the outside, the piezo-injectors are positioned in the cylinder head between the valves and, as a result, directly next to the spark plugs. They are supplied with fuel through stainless-steel pipes, fuel then being injected into the combustion chambers in finely atomised form at a pressure of up to 200 bar. This system pressure is generated by single-plunge fuel pumps on each row of cylinders and is maintained reliably at all times by short pipes and fuel travel.

The fuel injected in this process spreads out in conical form, thus burning in a particularly smooth and clean process. This, in turn, has a positive effect on engine emissions and sound, the cooling effect of the fuel/air mixture provided by direct fuel injection helping in addition to achieve a higher compression ratio than on a turbocharged engine with manifold injection. The bottom line, therefore, is an even higher degree of engine efficiency generating more power on less fuel.

In their configuration and structure, the cylinder heads largely follow the particular position of the injectors and spark plugs as well as the combustion process provided by High Precision Injection. Short combustion phases optimised for maximum efficiency build up a high level of pressure and temperature requiring optimised cylinder head geometry and an effective flow of coolant. The cylinder head components cast in a gravity process stand out in particular through their very high level of stiffness, while the cylinder head covers are made of aluminium and come with rubber profile seals.

Double-VANOS and volume flow-controlled oil pump for maximum efficiency.
Again in typical BMW style, the new twelve-cylinder comes with double-VANOS for infinite adjustment of camshaft control timing. This ensures part load running conditions with a high level of residual gas and reduced throttle loss for maximum fuel efficiency.
A further advantage of double-VANOS is its support in giving the engine a particularly direct response. Joined in a thermal process, the camshafts come with forged cams, additional triple cams on the intake side serving to drive the high-pressure fuel pumps. The valves on the exhaust side, in turn, are filled with sodium for optimum cooling and come with chrome-plated shafts.

The supply of oil to the new twelve-cylinder has also been optimised, the volume flow-controlled oil pump operating on individual demand with maximum efficiency: The six-chamber pendulum-slide pump delivers only as much oil as the engine requires at any given point in time under specific driving conditions.
An oil level sensor is integrated in the oil sump made of pressure-cast aluminium. And instead of a manual oil dipstick, an oil level indicator in the instrument cluster also operating while driving informs the driver of the oil level whenever required.

The new twelve-cylinder models in the BMW 7-Series again feature a wide range of technologies for minimum fuel consumption and emissions based on BMW's strategy of EfficientDynamics. These include Brake Energy Regeneration, electric coolant pumps operating on demand, and the volume flow-controlled oil pump further optimising the balance of load performance and fuel consumption.
With an increase in engine output versus the former models by 22 and an increase in maximum torque by 25 per cent, the average fuel consumption determined in the EU test cycle has been reduced to 12.9) litres/100 kilometres. The emission rating of the BMW 760i is 299) grams per kilometre.
The engine coolant system on the new twelve-cylinder excels through consistent integration of all pipes in the crankcase, optimised cross-sections and the surface structure ensuring a maximum heat exchanger function helping to warm up the engine far more quickly than before on the former power unit.
The arrangement of the coolant inlet immediately next to the main inlet duct for supplying oil serves in addition to connect the two media in thermal terms, again helping to warm up engine oil and maintain the ideal temperature at all times.
The flow of coolant is separated on the two rows of cylinders, in each case running diagonally from the rear outside to the front inside. And last but not least, the arrangement of the outlets again helps to consistently spread out and maintain the temperature level over a wide range of engine speed.

The BMW's outstanding competence in twelve-cylinder technology: a long tradition of supreme performance.
This is the fourth time that a twelve-cylinder power unit marks the top end of the engine portfolio featured in the BMW 7-Series. And indeed, every new generation has further reinforced BMW's position as the leading manufacturer of luxury performance saloons. A BMW 7-Series with a twelve-cylinder power unit stands for exclusivity, supremacy and, not least, genuine innovation, the top-of-the-range engines providing the highest standard also on account of the maximum demands they are expected to meet right from the start in the development process.

The BMW's outstanding competence in the development and production of twelve-cylinder power units is based on a long tradition extending all the way back to the year 1925 when the Company for the first time hit the headlines by building an aircraft engine with twelve cylinders. Back then BMW's V12 developed maximum output of 750 hp, with two BMW twelve-cylinders powering the Dornier Wal seaplane just five years later in its record flight across the Atlantic.
In the second half of the 20th century BMW became the pioneer in introducing the twelve-cylinder in the most outstanding luxury cars. The BMW 750i launched in 1987, for example, was the first German twelve-cylinder saloon after the war. In the years to follow a long story of success in motorsport likewise contributed to the exceptional reputation of BMW's twelve-cylinders. The BMW V12 LMR, for example, dominated the racing scene right from the start in its very first race in 1999, the 12 Hours of Sebring, and in the same season clinched overall victory in the 24 Hours of Le Mans.

World debut: eight-speed automatic transmission in the new BMW 760i and the new BMW 760Li.
The unique qualities of the new V12 power unit with TwinPower Turbo Technology and High Precision Injection are combined in the new BMW 760i and the new BMW 760Li with an equally innovative concept for the transmission of power: the newly developed eight-speed automatic transmission making its world debut in a BMW production car. Ideally tailored to the power and performance characteristics of the twelve-cylinder power unit, the eight-speed automatic transmission combines supreme gearshift comfort, sportiness and efficiency at a level never achieved before.
The new eight-speed automatic transmission excels through the innovative configuration of gears and gearsets allowing the use of additional gears and a larger range of gear increments than on the former six-speed automatic transmission, without any negative effects on the size of the transmission, its weight, and the inner efficiency of the system.
The eight forward gears and the reverse gear all incorporate four simple gearsets and five gearshift elements. The innovative arrangement of these components seen for the first time on an eight-speed automatic transmission ensures that only two clutches are open in each gear at any given point in time, significantly reducing frictional losses under all driving conditions to an absolute minimum.

Optimum gearset configuration as the result of scientific research.
To achieve significant progress over BMW's proven six-speed automatic transmissions, BMW's engineers right from the start initiated an in-depth development process providing the basis for the new transmission. The initial consideration was that particularly the improvement of efficiency as desired was only possible with a transmission system offering an even larger number of gears and a wider range of gear increments versus a six-speed automatic transmission. A further objective was to keep the number of additional components to a minimum in order to optimise the inner efficiency of the system.

Triple progress with two additional gears: gearshift dynamics improved, comfort optimised, efficiency maximised.
Thanks to the larger range of gear increments now offered by the new transmission, the driver is able to use the highest gear at significantly reduced engine speed far more often than before. In the BMW 760i and the BMW 760Li, this not only optimises the car's economy also at higher speeds, but also enhances the smoothness and refinement of the twelve-cylinder.
With the number of gears being increased to eight, the individual steps between gears are smaller than before, despite the overall range of gear increments. Clearly, this benefits the sporting character of the transmission and, as a result, the dynamic nature of the car again in typical BMW style.
While accelerating the harmonious balance of gear ratios provides a very smooth and consistent increase in road speed, a feature corresponding ideally with the ongoing surge of power from the new V12 and again confirming the unparalleled supremacy of the BMW 760i and the BMW 760Li.

A further advantage of the small gear increments is the enhancement of gearshift comfort in BMW's most outstanding Luxury Performance Saloon, with only a slight change in engine speed when shifting from one gear to another.

Flexible, up-to-date, oriented to the future.
With the number of transmission components being increased only slightly over the former six-speed automatic transmission, the new eight-speed automatic offers an unusually high level of internal efficiency. So-called gear-mesh efficiency, for example, is more than 98 per cent in each gear. And being configured as a direct gear, sixth gear reduces frictional losses to zero.
The low weight of the new transmission virtually identical to that of the former six-speed automatic likewise benefits the overall efficiency of the car, with the integration of an additional gearset being compensated by the optimisation of weight in other areas.
In all the minimum converter slip, the high degree of internal efficiency, low frictional losses with only two clutches open at a time, the longer transmission ratios on the higher gears and the transmission management giving preference to low engine speeds at all times offer a reduction of fuel consumption versus the former six-speed automatic by approximately 6 per cent.

The new transmission may be combined with all kinds of engines and levels of performance, and may be integrated not only in cars with rear-wheel drive, but also in all-wheel-drive models. At the same time the eight-speed automatic transmission may be combined with hybrid drive, making it part of BMW's Active Hybrid technology combining an eight-cylinder gasoline engine with an electric motor.
The drive technology featured in the new BMW 760i and the new BMW 760Li makes a significant contribution to the significant innovation of power technology ensured by the BMW brand, the unique power and performance characteristics of the new V12 power unit and the innovative concept of eight-speed automatic transmission joining forces to provide a truly fascinating driving experience.
The eight-speed automatic transmission perfectly supplements both the supremacy and the dynamic character of the power unit. At the same time the exceptional efficiency of both top models in the BMW 7-Series results not just from the V12 power unit, but also from the transmission. Innovations developed in the context of BMW EfficientDynamics allow this luxury saloon to combine acceleration to 100 km/h in 4.6) seconds with average fuel consumption in the EU test cycle of 12.9) litres/100 kilometres.

The outstanding position of the new BMW 760i and the new BMW 760Li is further underlined by suspension technology specially developed for this Luxury Saloon, combining innovative driver assistance systems partly exclusive to BMW with a wide range of comfort amenities all featured as standard. More than ever before, therefore, both models meet the demands and requirements of the most discerning motorist seeking individual mobility of the highest calibre as part of his or her lifestyle dedicated to absolute perfection.